이성주 교수

In spite of the recent heightened interest in molybdenum disulfide (MoS2) as a two-dimensional material with substantial bandgaps and reasonably high carrier mobility, a method for the layer-controlled and large-scale synthesis of high quality MoS2 films has not previously been established. Here, we demonstrate that layer-controlled and large-area CVD MoS2 films can be achieved by treating the surfaces of their bottom SiO2 substrates with the oxygen plasma process. Raman mapping, UV-Vis, and PL

Correction for 'Surface group modification and carrier transport properties of layered transition metal carbides (Ti2CTx, T: -OH, -F and -O)' by Shen Lai, et al., Nanoscale, 2015, DOI: 10.1039/c5nr06513e.

We fabricated dye-sensitized MoS2 photodetectors that utilized a single-layer MoS2 treated with rhodamine 6G (R6G) organic dye molecules (with an optical band gap of 2.38 eV or 521 nm). The proposed photodetector showed an enhanced performance with a broad spectral photoresponse and a high photoresponsivity compared with the properties of the pristine MoS2 photodetectors. The R6G dye molecules deposited onto the MoS2 layer increased the photocurrent by an order of magnitude due to charge transfe

Direct chemical vapor deposition (CVD) growth of single-layer graphene on CVD-grown hexagonal boron nitride (h-BN) film can suggest a large-scale and high-quality graphene/h-BN film hybrid structure with a defect-free interface. This sequentially grown graphene/h-BN film shows better electronic properties than that of graphene/SiO2 or graphene transferred on h-BN film, and suggests a new promising template for graphene device fabrication.

Recently, MXenes, which are 2D early transition metal carbides and carbonitrides, have attracted wide attention because of their excellent conductivities. Here, the electrode applications of Ti 2 C(OH) x F y , one member of the MXene family, in WSe 2 and MoS 2 field effect transistors (FETs) are assessed. Kelvin probe force microscopy analysis is performed to determine its work function, which is estimated to be ≈4.98 eV. Devices based on WSe 2 /Ti 2 C(OH) x F y and MoS 2 /Ti 2 C(OH) x F y heter

High speed photodetectors are a key building block, which allow a large wavelength range of detection from 850 nm to telecommunication standards at optical fiber band passes of 1.3-1.55 μm. Such devices are key components in several applications such as local area networks, board to board, chip to chip and intrachip interconnects. Recent technological achievements in growth of high quality SiGe/Ge films on Si wafers have opened up the possibility of low cost Ge-based photodetectors for near infr

We report the preparation of thickness-controlled few-layer black phosphorus (BP) films through the modulated plasma treatment of BP flakes. Not only does the plasma treatment control the thickness of the BP film, it also removes the chemical degradation of the exposed oxidized BP surface, which results in enhanced field-effect transistor (FET) performance. Our fabricated BP FETs were passivated with poly(methyl methacrylate) (PMMA) immediately after the plasma etching process. With these techni

The physical and chemical properties of MXenes are strongly dependent on surface terminations; thus, the tailoring of surface functional groups in two-dimensional transition-metal carbides (MXenes) may extend the applicability of these compelling materials to a wider set of fields. In this work, we demonstrate the chemical modification of Ti 3 C 2 T x MXene via diazonium covalent chemistry and the subsequent effects on the electrical properties of MXene. The 4-nitrophenyl group was grafted onto

The epitaxial synthesis of molybdenum carbide (Mo 2 C, a 2D MXene material) via chemical conversion of molybdenum disulfide (MoS 2 ) with thermal annealing under CH 4 and H 2 is reported. The experimental results show that adjusting the thermal annealing period provides a fully converted metallic Mo 2 C from MoS 2 and an atomically sharp metallic/semiconducting hybrid structure via partial conversion of the semiconducting 2D material. Mo 2 C/MoS 2 hybrid junctions display a low contact resistanc

Despite heightened interest in 2D transition-metal dichalcogenide (TMD) doping methods for future layered semiconductor devices, most doping research is currently limited to molybdenum disulfide (MoS2), which is generally used for n-channel 2D transistors. In addition, previously reported TMD doping techniques result in only high-level doping concentrations (degenerate) in which TMD materials behave as near-metallic layers. Here, we demonstrate a controllable nondegenerate p-type doping (p-dopin

Two different growth modes of large-area hexagonal boron nitride (h-BN) film, a conventional chemical vapor deposition (CVD) growth mode and a high-pressure CVD growth mode, were compared as a function of the precursor partial pressure. Conventional self-limited CVD growth was obtained below a critical partial pressure of the borazine precursor, whereas a thick h-BN layer (thicker than a critical thickness of 10 nm) was grown beyond a critical partial pressure. An interesting coincidence of a cr

We report a simple and scalable method to fabricate homogeneous transparent conductive thin films (Ti 2 CT x, one of the MXene) by dip coating of an Al 2 O 3 substrate in a colloidal solution of large-area Ti 2 CT x thin flakes. Scanning electron microscopy and atomic force microscopy images exhibit the wafer-scale homogeneous Ti 2 CT x thin film (∼5 nm) covering the whole substrate. The sheet resistance is as low as 70 Ω/sq at 86% transmittance, which corresponds to the high figure of merit (FO

Abstract To address the demands of emerging data‐centric computing applications, ferroelectric field‐effect transistors (Fe‐FETs) are considered the forefront of semiconductor electronics owing to their energy and area efficiency and merged logic–memory functionalities. Herein, the fabrication and application of an Fe‐FET, which is integrated with a van der Waals ferroelectrics heterostructure (CuInP 2 S 6 / α ‐In 2 Se 3 ), is reported. Leveraging enhanced polarization originating from the dipol

Channel current conduction modulation with the spontaneous polarization of ferroelectric films in ferroelectric field-effect transistors (FeFETs) has been widely investigated. Low interface quality and thermodynamic instability owing to the presence of dangling bonds in the conventional ferroelectrics have limited the memory retention and endurance of FeFETs. This, in turn, prevents their commercialization. However, the atomically thin nature of 2D ferroelectric, semiconducting, and insulating f

A WSe2 -based vertical graphene-transition metal dichalcogenide heterojunction barristor shows an unprecedented on-current increase with decreasing temperature and an extremely high on/off-current ratio of 5 × 10(7) at 180 K (3 × 10(4) at room temperature). These features originate from a trap-assisted tunneling process involving WSe2 defect states aligned near the graphene Dirac point.