Skip to main content

정성모 교수

Sungmo Jung

포항공과대학교 친환경소재대학원 · 공학

연구실 소개

정성모 교수의 연구실은 철강 공정에서 발생하는 슬래그의 거품성질, 화학적 조성 제어 및 재활용 기반 기술 개발을 핵심으로 삼고 있습니다. 특히 BOF 슬래그의 거품 거동, 마그네시아 및 티타니아 산화물의 열역학적 거동, 코크스의 가스화 거동 등 철강 제련 공정의 안정성과 효율성을 높이기 위한 기초 연구를 수행하고 있습니다. 또한 슬래그 내 유해 원소 제거 및 금속 회수 기술 개발을 통해 철강 산업의 지속가능성 확보에 기여하고자 합니다.

슬래그 거품성질열역학적 평형철강 슬래그 재활용마그네시아 및 티타니아 산화물가스화 반응

연구 현황

논문 수
153
총 인용 수
1,319
최근 5년 논문
30
주요 분야
공학

연구 성과 추이

표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.

5개년 연도별 논문 게재 수
30총합
2021
2022
2023
2024
2025
5개년 연도별 피인용 수
116총합
20212022202320242025

주요 논문

15
1
논문|인용수 90·2000
Foaming Characteristics of BOF Slags.
Sung‐Mo Jung, R. J. Fruehan
SJR Q2ISIJ InternationalOA

Slag foaming measurements were carried out for BOF type slags that exist during the first half of the blowing period in order to better understand slopping of slag. The foam index (Σ) decreases with increasing FeO up to about 20% FeO content and is almost constant for FeO from 20 to 32 % FeO. This is believed tobe because above about 25% FeO, the viscosity is nearly constant. The foam index shows a minimum value at basicity[5(CaO1MgO)/(SiO2+Al2O3 )] of 1.4 at 1 713 K; it increases at higher basi

Mechanical EngineeringEngineering
2
논문|인용수 45·2015
Gasification Effect of Metallurgical Coke with CO2 and H2O on the Porosity and Macrostrength in the Temperature Range of 1100 to 1500 °C
Soon-Mo Shin, Sung‐Mo Jung
SJR Q1Energy & Fuels

The gasification of metallurgical cokes with CO 2 and H 2 O on their porosity and macrostrength were investigated in the current study. Cokes were reacted with CO 2 or H 2 O in the temperature range of 1100 to 1500 °C. During the reaction, the compositional change of product gases were measured by quadruple mass spectrometry (QMS) for evaluating the gasification rate. Image analysis was carried out to measure the porosity according to the distance from the coke surface. The porosity at the surfa

Biomedical EngineeringEngineering
3
논문|인용수 31·2015
Effects of CaO/CaCO3 on the Carbothermic Reduction of Titanomagnetite Ores
Sung‐Mo Jung
SJR Q2Metallurgical and Materials Transactions B
Mechanical EngineeringEngineering
4
논문|인용수 29·2001
Thermodynamics of Titanium Oxide in Ladle Slags.
Sung‐Mo Jung, R. J. Fruehan
SJR Q2ISIJ InternationalOA

It is necessary to have information on the thermodynamic behavior of titanium oxide in ladle type slags in order to control the titanium content in several grades of steel. In the present study, the thermodynamics was determined from the equilibrium between Fe–Csat–Ti and CaO–SiO2-–30%Al2O3–MgO–TiOx slags in equilibrium with CO and from the equilibrium between Fe–Csat–(1618)%Cr–Si–Ti and CaO–SiO2–20%Al2O3–MgO–TiOx slags in equilibrium with CO. From the experiment with Fe–Csat–Ti alloy, the activ

Mechanical EngineeringEngineering
5
논문|인용수 27·2015
Distribution Behavior of Phosphorus and Metallization of Iron Oxide in Carbothermic Reduction of High-Phosphorus Iron Ore
Ji-Whoe Cha, Dong-Yuk Kim, Sung‐Mo Jung
SJR Q2Metallurgical and Materials Transactions B
Mechanical EngineeringEngineering
6
논문|인용수 25·2002
Thermodynamic Properties of Manganese Oxide in BOF Slags.
Sung‐Mo Jung, Chang‐Hee Rhee, Dong Joon Min
SJR Q2ISIJ InternationalOA

It is necessary to understand the thermodynamic properties of MnO in steelmaking slags for the smelting reduction of Mn ore in BOF process. Studies of the manganese distribution between CaO–SiO2–FetO–MnO slags and liquid silver in equilibrium with solid Fe in the temperature range of 1623 to 1723 K were carried out under a CO/CO2 atmosphere.The FetO content in (32.436.3)%CaO–(31.644.0)%SiO2–(9.924.1)%FeO–(0.42.6)%Fe2O3–(8.910.8)%MnO slags was found to have a linear relationship with oxygen parti

Mechanical EngineeringEngineering
7
논문|인용수 24·2014
Use of oxidation roasting to control NiO reduction in Ni-bearing limonitic laterite
Ji-Ook Park, Hyunsoo Kim, Sung‐Mo Jung
SJR Q1Minerals Engineering
Mechanical EngineeringEngineering
8
논문|인용수 24·2006
Reduction Behaviour of BOF type Slags by Solid Carbon
Sung‐Mo Jung, Young‐Ju Do, Ju‐Han Choi
SJR Q2steel research international

Experiments were carried out on a system with artificially prepared slags in a graphite crucible, in order to examine the possibility of recycling BOF slags produced in the steelmaking process. More than 80% of FeO and P 2 O 5 was reduced within 20 minutes and the FeO reduction rate was greater than that of P 2 O 5 . P 2 O 5 reduction began after more than 60% of FeO was reduced. Increasing slag basicity enhanced the reduction of FeO and P 2 O 5 . Temperature also improved slag reduction. The ov

Mechanical EngineeringEngineering
9
논문|인용수 22·2019
Morphology of Iron and Agglomeration Behaviour During Reduction of Iron Oxide Fines
Muhammad Irfan Ahadian Barustan, Sung‐Mo Jung
SJR Q1Metals and Materials International
Mechanical EngineeringEngineering
10
논문|인용수 19·1993
Thermodynamic Study on MnO Behavior in MgO-saturated Slag Containing FeO.
Sung‐Mo Jung, Seon-Hyo Kim, Chang‐Hee Rhee, Dong-Jun Min
SJR Q2ISIJ InternationalOA

In order to understand the behavior of manganese oxide in smelting reduction process, the manganese equilibrium between ironmaking slag containing FeOand silver melt was investigated over the temperature range of 1 400-1 500'C. The oxygen partial pressure was controlled by COICO, ratio. Test results on Mn content in silver have been thermodynamically converted into those in supercooled or carbon-saturated iron melts and the activity coefficient of MnO in slag was determined experimentally. The a

Mechanical EngineeringEngineering
11
논문|인용수 18·2006
Reduction Behaviour of BOF Slags by Carbon in Iron
Sung‐Mo Jung, Young‐Ju Do
SJR Q2steel research international

Experiments were carried out in a system with BOF slags from industrial operations in order to optimize the conditions of recycling BOF slags produced in the steelmaking process. Reduction reactions of FeO and P 2 O 5 proceeded steadily and the FeO reduction rate was almost identical to that of P 2 O 5 . The reduction reaction of FeO and P 2 O 5 in BOF slag at the slag/gas interface is the rate‐controlling step. The reaction rates of FeO and P 2 O 5 by dissolved carbon in molten iron are of firs

Mechanical EngineeringEngineering
12
논문|인용수 17·2015
Kinetic study on carbothermic reduction of MnO 2 with graphite
D.-Y. Kim, Il‐Hun Jeong, Sung‐Mo Jung
SJR Q2Ironmaking & Steelmaking Processes Products and Applications

The carbothermic reduction of MnO2 with graphite has been investigated for the reduction mechanism in the temperature range of 1000–1300°C. Although several researchers studied the reduction step from MnO2 to MnO, it was attempted to employ the in situ testing of reduction behaviour with the analysis of product gas composition simultaneously from the different points of view. The overall reduction rate increased with temperature, which was controlled by the carbon gasification. It is because the

Mechanical EngineeringEngineering
13
논문|인용수 17·2003
Equilibria of Manganese and Sulfur between Liquid Iron and CaO-SiO2-FetO-MgO-MnO Slags Saturated with 2CaO SiO2 and MgO.
Sung‐Mo Jung
SJR Q2ISIJ InternationalOA

The equilibria of manganese and sulfur between liquid iron and CaO-SiO 2 -Fe t O-MgO slags saturated with dicalcium silicate and MgO were studied in the temperature range of 1 823 to 1 923 K. The solubility of MgO decreases with increasing Fe t O content. The values of (%MnO)/[%Mn] increase with increasing Fe t O content and its relation was formulated by an empirical equation. The activity of Fe t O for the present slag system almost stays unchanged with increasing Fe t O content investigated.

Mechanical EngineeringEngineering
14
논문|인용수 16·2013
A Kinetic Study on Carbothermic Reduction of Hematite with Graphite Employing Thermogravimetry and Quadruple Mass Spectrometry
Sung‐Mo Jung, Sang Ho Yi
SJR Q2steel research international

Abstract The reduction of hematite–graphite pellet was investigated from a kinetic viewpoint in the temperature range of 1173–1473 K (900–1200°C). The experimental procedure included thermogravimetric analysis (TGA) for measuring the weight change of the pellet and quadruple mass spectrometry (QMS) for monitoring the compositional change of the product gases. By applying a uniform internal reduction model to the current system, the activation energies for the reduction of Fe 3 O 4 to wustite and

Mechanical EngineeringEngineering
15
논문|인용수 16·2016
Improvement of sintering characteristics by selective granulation of high Al 2 O 3 iron ores and ultrafine iron ores
S.-W. Kim, Jiwon Jeon, In-Kook Suh, Sung‐Mo Jung
SJR Q2Ironmaking & Steelmaking Processes Products and Applications

The worldwide steel companies are expected to use low grade iron ores such as pisolitic iron ores, high Al 2 O 3 iron ores and ultrafine iron ores etc. in their sinter blends due to the depletion of high grade iron ores or for the economic reason. This study investigated the methods for improving sintering characteristics without deteriorating sintering productivity and sinter quality by blending mini-pellets comprising high Al 2 O 3 pisolitic iron ores and ultrafine iron ores containing low alu

Mechanical EngineeringEngineering

대표 연구 분야

Mechanical EngineeringComputer Networks and CommunicationsComputer Vision and Pattern RecognitionBiomedical EngineeringMaterials ChemistryRadiation

정성모 교수의 연구를 Nubint에서 더 깊이 살펴보세요

이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.