안성필 교수

Self-junctioned copper nanofiber transparent flexible films are produced using electrospinning and electroplating processes that provide high performances of T = 97% and Rs = 0.42 Ω sq(-1) by eliminating junction resistance at wire intersections. The film remains conductive after being stretched by up to 770% (films with T = 76%) and after 1000 cycles of bending to a 5 mm radius.

Supersonic cold spraying is an emerging technique for rapid deposition of films of materials including micrometer-size and sub-micrometer metal particles, nanoscale ceramic particles, clays, polymers, hybrid materials composed of polymers and particulates, reduced graphene oxide (rGO), and metal-organic frameworks. In this method, particles are accelerated to a high velocity and then impact a substrate at near ambient temperature, where dissipation of their kinetic energy produces strong adhesio

Wearable electronic textiles are used in sensors, energy-harvesting devices, healthcare monitoring, human-machine interfaces, and soft robotics to acquire real-time big data for machine learning and artificial intelligence. Wearability is essential while collecting data from a human, who should be able to wear the device with sufficient comfort. In this study, reduced graphene oxide (rGO) and silver nanowires (AgNWs) were supersonically sprayed onto a fabric to ensure good adhesiveness, resultin

Coaxial electrospinning was used to fabricate two types of core-shell fibers: the first type with liquid resin monomer in the core and polyacrylonitrile in the shell, and the second type with liquid curing agent in the core and polyacrylonitrile in the shell. These two types of core-shell fibers were mutually entangled and embedded into two flexible transparent matrices thus forming transparent flexible self-healing composite materials. Such materials could be formed before only using emulsion e

Experiments were conducted to measure the performance of direct-current-pulsed electrohydrodynamic drop formation as a function of liquid viscosity, electrical conductivity, and surface tension. While hydrodynamic and charge relaxation times and Taylor cone formation frequencies suggest theoretical drop-generation frequencies well in excess of 100 Hz, we show that it is impossible to produce more than 50 drops per second with performance decreasing as viscosity increased or electrical conductivi

Abstract Here, ultrathin, flexible, and sustainable nanofiber‐based piezoelectric nanogenerators (NF‐PENGs) are fabricated and applied as wave energy harvesters. The NF‐PENGs are composed of poly(vinylidene fluoride‐ co ‐trifluoroethylene) (P(VDF‐TrFE)) nanofibers with embedded barium strontium titanate (BaSrTiO 3 ) nanoparticles, which are fabricated by using facile, scalable, and cost‐effective fiber‐forming methods, including electrospinning and solution blowing. The inclusion of ferroelectri

Here, we fabricated nanofiber (NF)-based triboelectric nanogenerators (TENGs) from natural biopolymers using the industrially scalable solution blowing. This technique eliminates severe restrictions on solutions to be used and allows one to achieve biocompatible devices. Here, solutions of soy protein and lignin were blown into continuous monolithic NFs of hundreds of nanometers in diameter. The technique we employed yields large-area NF mats within tens of minutes and has never been employed to

BACKGROUND: Pain is a vital sense that indicates the risk of injury at a particular body part. Successful control of pain is the principal aspect in medical treatment. In recent years, the advances of nanotechnology in pain management have been remarkable. In this review, we focus on literature and published data that reveal various applications of nanotechnology in acute and chronic pain management. METHODS: The presented content is based on information collected through pain management publica

Abstract A multifunctional sensor capable of simultaneous sensing of temperature, pressure, and proximity has been developed. This transparent and body-attachable device is also capable of providing heat under low voltage. The multi-sensor consists of metal fibers fabricated by electrospinning and electroplating. The device comprises randomly deposited metal fibers, which not only provide heating but also perform as thermal and proximity sensors, and orderly aligned metal fibers that act as a pr