김태수 교수

All-polymer solar cells have shown great potential as flexible and portable power generators. These devices should offer good mechanical endurance with high power-conversion efficiency for viability in commercial applications. In this work, we develop highly efficient and mechanically robust all-polymer solar cells that are based on the PBDTTTPD polymer donor and the P(NDI2HD-T) polymer acceptor. These systems exhibit high power-conversion efficiency of 6.64%. Also, the proposed all-polymer sola

While humans easily recognize relations between data from different domains without any supervision, learning to automatically discover them is in general very challenging and needs many ground-truth pairs that illustrate the relations. To avoid costly pairing, we address the task of discovering cross-domain relations given unpaired data. We propose a method based on generative adversarial networks that learns to discover relations between different domains (DiscoGAN). Using the discovered relat

Blind source separation (BSS) is a challenging problem in real-world environments where sources are time delayed and convolved. The problem becomes more difficult in very reverberant conditions, with an increasing number of sources, and geometric configurations of the sources such that finding directionality is not sufficient for source separation. In this paper, we propose a new algorithm that exploits higher order frequency dependencies of source signals in order to separate them when they are

Wearable electronics represent a significant paradigm shift in consumer electronics since they eliminate the necessity for separate carriage of devices. In particular, integration of flexible electronic devices with clothes, glasses, watches, and skin will bring new opportunities beyond what can be imagined by current inflexible counterparts. Although considerable progresses have been seen for wearable electronics, lithium rechargeable batteries, the power sources of the devices, do not keep pac

Direct measurement of the adhesion energy of monolayer graphene as-grown on metal substrates is important to better understand its bonding mechanism and control the mechanical release of the graphene from the substrates, but it has not been reported yet. We report the adhesion energy of large-area monolayer graphene synthesized on copper measured by double cantilever beam fracture mechanics testing. The adhesion energy of 0.72 ± 0.07 J m(-2) was found. Knowing the directly measured value, we fur

Conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PEDOT: PSS) has attracted significant attention as a hole transport and electrode layer that substitutes metal electrodes in flexible organic devices. However, its weak cohesion critically limits the reliable integration of PEDOT: PSS in flexible electronics, which highlights the importance of further investigation of the cohesion of PEDOT: PSS. Furthermore, the electrical conductivity of PEDOT: PSS is insufficient for

While the regioregularity (RR) of conjugated polymers is known to have a strong influence on their inherent properties, systematic study of the RR effect has been limited due to the lack of a synthetic methodology. Herein, we successfully produced a series of poly(3-hexylthiophene)s (P3HTs) having a wide range of RR from 64 to 98%. Incorporation of controlled amounts of head-to-head (H–H) coupled dimer in modified Grignard metathesis polymerization allows a facile tuning of the RR of the P3HTs w

This paper describes a comparison of two characterization techniques for determining the mechanical properties of thin-film organic semiconductors for applications in soft electronics. In the first method, the film is supported by water (film-on-water, FOW), and a stress–strain curve is obtained using a direct tensile test. In the second method, the film is supported by an elastomer (film-on-elastomer, FOE), and is subjected to three tests to reconstruct the key features of the stress–strain cur

Abstract All‐polymer solar cells (all‐PSCs) are a highly attractive class of photovoltaics for wearable and portable electronics due to their excellent morphological and mechanical stabilities. Recently, new types of polymer acceptors ( P A s) consisting of non‐fullerene small molecule acceptors (NFSMAs) with strong light absorption have been proposed to enhance the power conversion efficiency (PCE) of all‐PSCs. However, polymerization of NFSMAs often reduces entropy of mixing in PSC blends and

Reliable integration of organometallic halide perovskite in photovoltaic devices is critically limited by its low stability in humid environments. Furthermore, additives to increase the mobility in the hole transport material (HTM) have deliquescence and hygroscopic properties, which attract water molecules and result in accelerated degradation of the perovskite devices. In this study, a double cantilever beam (DCB) test is used to investigate the effects of additives in the HTM layer on the per

Abstract High efficiency and mechanical robustness are both crucial for the practical applications of all‐polymer solar cells (all‐PSCs) in stretchable and wearable electronics. In this regard, a series of new polymer acceptors (P A s) is reported by incorporating a flexible conjugation‐break spacer (FCBS) to achieve highly efficient and mechanically robust all‐PSCs. Incorporation of FCBS affords the effective modulation of the crystallinity and pre‐aggregation of the P A s, and achieves the opt