정연식 교수

Self-assembling materials are the building blocks of bottom-up nanofabrication processes, but they need to be templated to impose long-range order and eliminate defects. In this work, the self-assembly of a thin film of a spherical-morphology block copolymer is templated using an array of nanoscale topographical elements that act as surrogates for the minority domains of the block copolymer. The orientation and periodicity of the resulting array of spherical microdomains are governed by the comm

Templated self-assembly of a cylinder-forming poly(styrene-b-dimethylsiloxane) (PS-PDMS) diblock copolymer has been investigated for nanolithography applications. The large chi-parameter of the blocks and the use of a PDMS-brush substrate surface treatment are especially advantageous for achieving long-range ordering and minimizing defect densities, and the high Si content in PDMS leaves a robust oxide etch mask after two-step reactive ion etching. By adjusting mesa width and solvent-annealing v

MoS2 is considered a promising two-dimensional active channel material for future nanoelectronics. However, the development of a facile, reliable, and controllable doping methodology is still critical for extending the applicability of MoS2. Here, we report surface charge transfer doping via thiol-based binding chemistry for modulating the electrical properties of vacancy-containing MoS2 (v-MoS2). Although vacancies present in 2D materials are generally regarded as undesirable components, we sho

The facile synthesis of silicon nanotubes using a surface sol-gel reaction on pyridine nanowire templates is reported and their performance for energy storage is investigated. Organic-inorganic hybrid pyridine/silica core-shell nanowires prepared using surface sol-gel reaction were converted to silica nanotubes by pyrolysis in air; this was followed by the reduction to silicon nanotubes via magnesiothermic reaction. The electrochemical activity of the obtained silicon nanotubes showed excellent

Herein, we report a facile and robust route to nanoscale tunable triboelectric energy harvesters realized by the formation of highly functional and controllable nanostructures via block copolymer (BCP) self-assembly. Our strategy is based on the incorporation of various silica nanostructures derived from the self-assembly of BCPs to enhance the characteristics of triboelectric nanogenerators (TENGs) by modulating the contact-surface area and the frictional force. Our simulation data also confirm

Control over carrier type and doping levels in semiconductor materials is key for optoelectronic applications. In colloidal quantum dots (CQDs), these properties can be tuned by surface chemistry modification, but this has so far been accomplished at the expense of reduced surface passivation and compromised colloidal solubility; this has precluded the realization of advanced architectures such as CQD bulk homojunction solids. Here we introduce a cascade surface modification scheme that overcome

Self-assembly of a block copolymer into cylindrical and/or perforated lamellar arrays within substrate trenches can be extensively tuned during the solvent-annealing process. Following reactive-ion etching, SEM images reveal that the solvent mixing ratio and the vapor pressure determine the type of array obtained and influence the dimensions of the repeat unit. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not

The templated self-assembly of block copolymer (BCP) thin films can generate regular arrays of 10-50 nm scale features with good positional and orientational accuracy, but the ordering, registration and pattern transfer of sub-10-nm feature sizes is not well established. Here, we report solvent-annealing and templating methods that enable the formation of highly ordered grating patterns with a line width of 8 nm and period 17 nm from a self-assembled poly(styrene-b-dimethylsiloxane) (PS-PDMS) di

Abstract Despite highly promising characteristics of three-dimensionally (3D) nanostructured catalysts for the oxygen evolution reaction (OER) in polymer electrolyte membrane water electrolyzers (PEMWEs), universal design rules for maximizing their performance have not been explored. Here we show that woodpile (WP)-structured Ir, consisting of 3D-printed, highly-ordered Ir nanowire building blocks, improve OER mass activity markedly. The WP structure secures the electrochemically active surface

3D stacking of plasmonic nanostructures is achieved using a solvent-assisted nanotransfer printing (S-nTP) technique to provide extremely dense and regular hot spot arrays for highly sensitive surface-enhanced Raman spectroscopy (SERS) analysis. Moreover, hybrid plasmonic nanostructures obtained by printing the nanowires on a continuous metal film or graphene surface show significantly intensified SERS signals due to vertical plasmonic coupling.

Nanostructured conjugated organic thin films are essential building blocks for highly integrated organic devices. We demonstrate the large-area fabrication of an array of well-ordered 15 nm wide conducting polymer nanowires by using an etch mask consisting of self-assembled patterns of cylinder-forming poly(styrene-b-dimethylsiloxane) diblock copolymer confined in topographic templates. The poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) nanowires operated as an ethanol vapor sensor, sug

An extraordinarily large degree of tunability in geometry and dimension is demonstrated in films of a self-assembled block copolymer. A poly(2-vinylpyridine-b-dimethylsiloxane) block copolymer with highly incompatible blocks was spun-cast on patterned substrates and treated with various solvent vapors. The degree of selective swelling in the poly(2-vinylpyridine) matrix block could be controlled over an extensive range, leading to the formation of various microdomain morphologies such as spheres

Graphene dots precisely controlled in size are interesting in nanoelectronics due to their quantum optical and electrical properties. However, most graphene quantum dot (GQD) research so far has been performed based on flake-type graphene reduced from graphene oxides. Consequently, it is extremely difficult to isolate the size effect of GQDs from the measured optical properties. Here, we report the size-controlled fabrication of uniform GQDs using self-assembled block copolymer (BCP) as an etch