박영빈 교수
Young-Bin Park
UNIST 기계공학과 · 공학
연구실 소개
박영빈 교수 연구실은 나노소재 기반의 고성능 복합재료 개발에 주력하고 있으며, 특히 그래핀 유도체와 고분자 매트릭스를 결합한 나노복합재를 통해 기계적 강도, 열전도성 및 환경 친화성 향상을 도모하고 있습니다. 수용성 고분자인 PVA를 위한 수분 차단막으로서의 그래핀 산화물 기반 복합막, 그리고 열전도성 향상에 기여하는 구리 산화물-그래핀 산화물 나노플루이드 등 응용 분야에 특화된 소재 설계가 핵심입니다. 또한, CFRP 등의 복합재의 구조적 건강 모니터링을 위한 비파괴적 자기감지 기술과 인공지능 기반 손상 진단 기술 개발도 함께 진행하고 있습니다.
연구 현황
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
주요 논문
15Poly(dopamine)-treated graphene oxide/poly(vinyl alcohol) ("dG-O/PVA") composite films were made and characterized. G-O was modified with poly(dopamine) in aqueous solution and then chemically reduced to yield poly(dopamine)-treated reduced G-O. A combination of hydrogen bonding, strong adhesion of poly(dopamine) at the interface of PVA and G-O sheets, and reinforcement by G-O resulted in increases in tensile modulus, ultimate tensile strength, and strain-to-failure by 39, 100, and 89%, respecti
Copper oxide nanoparticles nanofluids (CuO-NPs-NF) are promising candidates for pool boiling critical heat flux (CHF) applications due to their multifaceted advantages like easy tunability, eco-friendliness, cost-effectiveness, easy chemical modification and higher thermal conductivities. In addition, entrapping the CuO-NPs in/on to graphene oxide (GO) improves the CHF values compared to CuO-NPs alone. This paper reports a high performance hybrid NFs based on CuO and GO nanocomposites (CuO:GO-NC
대표 연구 분야
박영빈 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.