유재웅 교수
Yu Jae-Woong
경희대학교 신소재공학과 · 공학
연구실 소개
유재웅 교수의 연구실은 유기 전자소자, 특히 유기 발광다이오드(OLEDS), 양자점 LED, 유기 태양전지 등에서의 수명과 효율성을 극대화하기 위한 고성능 수분 차단막 및 표면 공학 기반의 신소재 개발에 주력하고 있습니다. 특히 삼중층 구조의 실리콘 질화막 기반 초저수증기 투과율 방벽과 하이브리드 투명 전도체를 접목한 도전성 필름을 통해 유연성과 내구성을 동시에 확보한 기술을 개발하고 있으며, 전자 이동도 제어 및 표면 특성 최적화를 통한 소자 성능 향상에도 기여하고 있습니다.
연구 현황
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
주요 논문
15Organic electronic devices such as organic light-emitting diodes (OLEDs), quantum dot LEDs, and organic photovoltaics are promising technologies for future electronics. However, achieving long-term stability of organic-based optoelectronic devices has been regarded as a crucial problem to be solved. In this work, a simple and reproducible fabrication method for ultralow water permeation barrier films having a triple-layered (triad) hydrogenated silicon nitride (a-SiN<sub><i>x</i></sub>:H)/nanosi
Monitoring the reaction of an aromatic diamine cure agent with epoxy by fluorescence technique was used for cure characterization of the interphase in epoxy/glass and epoxy/carbon composites. The effect of the various surface treatments was first studied by the model interphase obtained by using a quartz plate for glass or a modified quartz plate for carbon surface. Aminosilane treated quartz cured faster and showed increased cure extent, while water aging and air oxidation showed almost no effe
is estimated to be approximately 9804 h, which is comparable to that of the 12 112 h for glass lid-encapsulated QD-LEDs. This result demonstrates that TFE with the ASH films has the potential to overcome the conventional drawbacks of glass lid encapsulation.
대표 연구 분야
유재웅 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.