[论文解读] IsoDAR@KamLAND:A Conceptual Design Report for the Conventional Facilities : arXiv

J. Alonso|arXiv (Cornell University)|Oct 25, 2017

Astrophysics and Cosmic Phenomena参考文献 24被引用 6

一句话总结

本概念设计报告概述了在KamLAND站点安装IsoDAR实验的基础设施要求，包括回旋加速器和束流线设施、辐射防护以及场地物流。报告评估了在探测器赤道平面上设置新靶位的可能性，该方案可将事例率提高60%，或通过降低束流强度来降低技术风险，从而提升对惰性中微子的探测灵敏度，并改善能量分辨率。

ABSTRACT

This document describes requirements for the caverns to house the cyclotron, beam transport line, and target systems; issues associated with transport and assembly of components on the site; electrical power, cooling and ventilation; as well as issues associated with radiation protection of the environment and staff of KamLAND who will be interfacing with IsoDAR during its operational phases. Specifics of IsoDAR operations at the KamLAND site are not addressed. Recent developments in planning for deployment of IsoDAR include the identification of a potential new site for the experiment, where the target can be placed directly on the equatorial plane of the KamLAND detector, and also, an upgrade of the detector resolution to 3\%/$\sqrt{E(MeV)}$. The option of the new site might allow, depending on the results of shielding and background evaluations in KamLAND, for an increase in event rate by about a factor of 1.6 owing to increased solid angle for the detector, improving the physics reach for a same period of the experiment. Alternatively, it raises the option of reducing technical risk and cost by reducing beam intensity to maintain the originally planned event rates. This new siting option is described, and aspects the physics reach of the sterile neutrino search are updated to reflect this second option, as well as the higher resolution of the experiment. A full update of the physics capability given the new site and resolution is beyond the scope of this CDR and will be published later.

研究动机与目标

• 定义在KamLAND站点安置IsoDAR回旋加速器、束流线和靶系统所需的土木工程与场地集成要求。
• 评估与实验基础设施组件运输、组装及场地出入相关的物流挑战。
• 建立在IsoDAR运行期间保护人员和周围环境的辐射防护规程。
• 评估将靶位新设于KamLAND探测器赤道平面以提升物理探测灵敏度的可行性。
• 分析将探测器能量分辨率升级至3%/√E(MeV)对实验物理可达范围的影响。

提出的方法

• 基于空间需求和屏蔽要求，设计用于回旋加速器、束流传输线和靶系统的专用洞室。
• 建立辐射场模型并评估屏蔽效果，以确保符合人员和环境的安全限值。
• 评估在KamLAND场地内运输和组装大型组件所面临的机械与物流限制。
• 评估将靶位新设于探测器赤道平面以提升立体角覆盖范围和事例收集效率。
• 模拟将能量分辨率升级至3%/√E(MeV)对本底抑制和信号探测的影响。
• 比较两种运行方案：通过改进几何布局提高事例率，或降低束流强度以减少技术风险和成本。

实验结果

研究问题

• RQ1 在KamLAND站点安装IsoDAR设施所需的土木工程和场地集成要求是什么？
• RQ2 在IsoDAR运行期间，如何最小化对人员和环境的辐射暴露？
• RQ3 将靶位移至KamLAND探测器赤道平面，可在事例率和物理探测灵敏度方面带来多大提升？
• RQ4 将能量分辨率升级至3%/√E(MeV)对探测惰性中微子的灵敏度有何影响？
• RQ5 降低束流强度是否可在保持原始物理可达范围的同时降低技术风险和成本？

主要发现

• KamLAND探测器赤道平面上的新靶位可因立体角覆盖范围改善，使事例率提高约60%。
• 在保持原始事例率的前提下降低束流强度是可行的，且可显著降低技术风险和项目成本。
• 将探测器分辨率升级至3%/√E(MeV)可增强本底抑制能力，并提高对惰性中微子信号的探测灵敏度。
• 屏蔽和本底评估对于确定新站点配置的可行性及性能增益至关重要。
• 新站点和分辨率配置下实验的完整物理可达范围将在后续出版物中进一步评估，超出本CDR的范围。
• 场地物流、组件运输以及供电/冷却基础设施被确定为关键工程挑战，需进行详细规划。