Skip to main content
QUICK REVIEW

[논문 리뷰] 1+1d SPT phases with fusion category symmetry: interface modes and non-abelian Thouless pump

Kansei Inamura, Shuhei Ohyama|arXiv (Cornell University)|2024. 08. 28.
Acoustic Wave Resonator TechnologiesEngineering인용 수 5
한 줄 요약

본 논문은 유한 비가역적(융합 범주) 대칭에 의해 보호되는 1+1d SPT 위상을 분석하고, 인터페이스 대수(interface algebras)을 구성하며, 주입 가능한 MPS로부터 fiber function자를 추출하고, 일-매개변수 가족에 대한 비가환 Thouless 펌프를 도입한다.

ABSTRACT

We consider symmetry protected topological (SPT) phases with finite non-invertible symmetry $\mathcal{C}$ in 1+1d. In particular, we investigate interfaces and parameterized families of them within the framework of matrix product states. After revealing how to extract the $\mathcal{C}$-SPT invariant, we identify the algebraic structure of symmetry operators acting on the interface of two $\mathcal{C}$-SPT phases. By studying the representation theory of this algebra, we show that there must be a degenerate interface mode between different $\mathcal{C}$-SPT phases. This result generalizes the bulk-boundary correspondence for ordinary SPT phases. We then propose the classification of one-parameter families of $\mathcal{C}$-SPT states based on the explicit construction of invariants of such families. Our invariant is identified with a non-abelian generalization of the Thouless charge pump, which is the pump of a local excitation within a $\mathcal{C}$-SPT phase. Finally, by generalizing the results for one-parameter families of SPT phases, we conjecture the classification of general parameterized families of general gapped phases with finite non-invertible symmetries in both 1+1d and higher dimensions.

연구 동기 및 목표

  • 1+1d에서 유한 비가역적(융합 범주) 대칭에 의해 보호되는 SPT 위상 연구를 동기부여한다.
  • fiber functor가 이러한 SPT 위상을 어떻게 분류하는지와 격자 MPS 구현으로부터 이 데이터를 어떻게 추출하는지 설명한다.
  • bulk-경계 대응을 C-SPT 위상 간의 인터페이스로 일반화하고 인터페이스 대수를 분석한다.
  • 비가환 Thouless 펌프를 통해 일-매개변수 가족의 C-SPT 상태를 분류하고 구성한다.
  • 1+1d 및 그 이상에서 융합 범주 대칭을 가지는 매개변수화된 유도된 위상의 분류 프레임워크를 제안한다.

제안 방법

  • 융합 범주, fiber functor, 그리고 이들의 SPT 위상과의 관계에 대한 검토.
  • C-대칭적 injective MPS를 통한 triple inner products로부터 fiber functor 데이터를 추출한다.
  • C-SPT 위상 간 인터페이스에 작용하는 인터페이스 대수의 정의와 분석을 수행한다.
  • fiber functor의 자기-함자를 통한 자동화(automorphisms)를 이용해 일-매개변수 C-SPT 상태의 불변량을 구성한다.
  • 자기-인터페이스 대수의 비가환 차원으로서의 비가환 Thouless 펌프를 정의한다.
  • 1- 및 2-카테고리 펀ctor 데이터로 매개변수화된 유도 위상의 모듈공간에 대한 일반적 추측을 논의한다.

실험 결과

연구 질문

  • RQ1fusion category의 fiber functor를 C-대칭을 realizing lattice models에서 어떻게 추출할 수 있는가?
  • RQ2C-SPT 위상 간 인터페이스에서 작용하는 대칭 연산의 대수적 구조는 무엇이며, 그 표현은 인터페이스 모드에 대해 무엇을 시사하는가?
  • RQ3fiber functor의 자기 자동화(automorphisms)를 통해 일-매개변수 C-SPT 위상은 어떻게 분류되며, 관련 비가환 Thouless 펌프의 본질은 무엇인가?
  • RQ41+1d C-SPT 위상에 대한 인터페이스 분석을 고차원에서의 매개변수화된 유도 위상에 대한 일반 프레임워크로 확장할 수 있는가?
  • RQ5Rep(D8) 또는 Vec_G와 같은 특정 융합 범주에 대해 어떤 명시적 불변량이 생기며, 그것들이 비가환 차원의 펌프를 어떻게 구현하는가?

주요 결과

  • 다른 C-SPT 위상 사이에는 인터페이스 대수의 불가환 표현으로 인해 축소되지 않는 축발현 모드가 존재해야 한다.
  • 같은 C-SPT 위상의 자기 인터페이스는 fiber functor의 자동화에 해당하며, 이는 1D 표현으로 이어진다.
  • 일-매개변수 가족에 대해 비가환 Thouless 펌프의 일반화가 나타나며, 자기 인터페이스 대수에 속하는 비가환 차지를 펌핑한다.
  • Rep(G) 대칭 및 Tambara-Yamagami 범주(D8, Q8, H8 포함)에 대한 명시적 구성들이 주어져 있다.
  • 제안된 프레임워크는 MPS 데이터, 인터페이스 대수, fiber functor 자동화를 연결하여 매개변수화된 SPT 상태를 분류하고, 비가환 대칭을 가진 유도된 위상의 모듈성 공간에 대한 보다 넓은 모듈 공간 설명을 추정한다.

이 논문 읽기

누빈트 뷰어에서 원문을 열고, 읽으면서 궁금한 곳을 바로 물어보세요.

누빈트에서 이 논문 읽기

이 리뷰는 AI가 논문 원문을 바탕으로 만들었습니다. 인용하기 전에 원문을 확인해 주세요.